Crimping Cable

Today was another step in the process of making this apartment ours: networking. We have fibre optic internet, so a theoretical 1Gbit network for our ISP; in reality, of course, we get somewhere between 7-800Gbit, but that’s still pretty great. However, up to this point, we had a ratty WiFi connection that only got us about 5-60Mbit—quite unsatisfactory. The harrowing tale of getting the Internet hooked up is for another day (possibly October 31st, given the tale), but for now I’m just happy that the first set is done.

In total, there’s a couple of stages to this project: drawing a cable from the router in the living room to the switch in the living room; installing an ethernet wall outlet there; drawing it through the bedroom, installing outlets on the other side; installing the office switch and hooking up the PCs; and, finally, drawing a cable from the living room switch to the media player switch, and connecting all the Internet media to that switch.

Now, to be clear: I’ve never done something like this before in my life. That is to say, I’ve built a network out of switches and cables, but all the cables were pre-cut, and I never put in a wall outlet before. So, today was a fun experience learning a new skill. I crimped a single cat6 cable, quite nervous about making mistakes (as the videos on it always emphasize how you need to push the cables through, and if you have a slight issue here or there, you’ll lose out on performance!). Fortunately, cutting it down to size was a breeze with the kit I bought, and crimping a new connector on it turned out to be the simplest thing ever. In fact, tacking the cable to the plinth in the living room turned out to be more of a challenge than crimping that cable was!

It’s the first of many cables, so I’m looking forward to continuing the process over the next week.